MTM (Mini Traction Machine)

MTM (Mini Traction Machine) ile ilgili görsel sonucu

Full description

The MTM2 is a flexible general purpose instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions. To date, PCS have sold over 200 Mini Traction Machines worldwide and this number is continuing to rise at a steady pace. One of the main applications is the fully automated traction mapping of lubricants under conditions commonly found in internal combustion engines. Additional features allow the measurement of anti-wear additive film growth on test specimens, investigation of soft contacts, reciprocating friction and wear measurements.

In the standard configuration the test specimens are a 19.05mm (3/4″) steel ball and a 46mm diameter steel disc. The ball is loaded against the face of the disc and the ball and disc are driven independently to create a mixed rolling/sliding contact. The frictional force between the ball and disc is measured by a force transducer. Additional sensors measure the applied load, the lubricant temperature and (optionally) the electrical contact resistance between the specimens and the relative wear between them.

Main Applications:

  • Wear Measurement and Testing
  • Soft Contact Investigation
  • Fuel Economy Modelling of Automotive Engine Oils
  • Determination of Traction Coefficients for Continuously Variable Transmissions (CVT)
  • Friction Modifier Evaluation using Rough Discs
  • Wet Clutch Screening
  • Boundary Additive Performance Evaluation
  • Traction Measurement under EHL, Mixed and Boundary Lubrication


Technical Specifications

Load 0 to 75 N.
Contact Pressures 0 to 1.25 GPa (standard specimens) up to 3.1 GPa with alternative specimens
Speed -4 to 4 ms-1
Slide/Roll Ratio 0 to 200%
Temperature Range Ambient to 150°C (lower with optional oil cooler)
Test Sample Volume 35 ml
Power Supply 100 - 240 Vac
Width 400mm/16"
Depth 600mm/24"
Height 400mm/16"
Weight 30kg/66lb